Virage VX-69
Documentation Project
CBTricks.com

TIPS:
You need to have Acrobat Reader version 5 or newer installed to view the files with icon.

If the files with or icon will not display see the Site FAQ for help on printing and using this information.



Board # EPT690010Z Ranger Comm. INC (SHA)
Looking over the front of the unit with component side up and DC power
removed.

1. Find the Black Shorting Bar behind the Eco/Time Pot.
It should be shorting out the middle and right pins.
Move the Shorting Bar left so it shorts out the middle and the left pin.

2. Find J4, a two (2) pin male connector, behind and to the right of VR3.
There is a female three (3) wire connector, with a yellow, green and violet wires plugged onto J4. Unplug the female three (3) wire connector and plug it onto a empty three (3) pin male connector that is just behind the Black Shorting Bar you moved left in step # 1 above.

3. On the back of the Band Selector (A,B,C) is a white and a red wire on
pin # 9.
Move only the white wire to pin # 10 (Pin Ten should already have a
black wire on it).

David, of City Electronics

Mic Wiring

Stock
1-Shield  (ground)
2-Yellow (audio)
3-Red     (transmit)
4-White  (receive)

Astatic
1-Shield & Blue
2-White
3-Red
4-Black
Yellow NC

Turner
1-Shield & Red
2-White
3-Blue
4-Black
Yellow NC

Sadelta
1-Shield
2-White
3-Brown
4-Green



Copyright © 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 CBTricks.com

Disclaimer: Although the greatest care has been taken while compiling these documents,

we cannot guarantee that the instructions will work on every radio presented.