Magnum Radio Maverick A24
Documentation Project
CBTricks.com


Frequency Conversion

Export Frequency Conversion

1.
 Remove the 4 resistors and jumper wire from the bottom of the main PCB. The resistors and jumper wire are inside protective sheathing.
2. After modification BAND "D" is the regular 40 channel CB band.

 

Echo Modification

1.
 The A24 echo is set for a reverb-type echo ("Big Radio Sound"). If you want to change it to "Turbo" type echo, then slightly increase the value of R-618 on the echo board. Stock, R-618 is a 33K ohm resistor. To experiment with different echo sounds, replace thr 33K ohm resistor with a slightly larger values (up to 80K ohm maximum.

 

WARNING! Not Legal For Class D CB Use In The U.S.A.

Copyright © 2001 CBTricks.com

Disclaimer: Although the greatest care has been taken while compiling these documents,

we cannot guarantee that the instructions will work on every radio presented.