Galaxy DX Radios DX95T
Documentation Project

CBTricks.com

Frequency Conversion

Before Conversion

Shown in stock position


After Conversion

Shown in mod position

Frequency Conversion

1.
Remove the top cover from the unit and locate wire jumper on the bottom of the main pcb. Move the wire from it's current position to the position shown in the drawing above.
2.
Re-Assemble the unit and check All Bands for Proper operation.


Copyright © 2003 CBTricks.com

Disclaimer: Although the greatest care has been taken while compiling these documents,

we cannot guarantee that the instructions will work on every radio presented.