Galaxy DX Radios DX949
Documentation Project

CBTricks.com
Frequency Conversion

1. 
Remove bottom cover from radio.
2. 
On the main PCB, locate J33. (See diagram above)
3. 
Locate wires on pins marked "P5" (yellow) & "P6" (grey).
4. 
Cut wire on "P5" (yellow) and install a SPST switch in line.
5. 
Cut wire on "P6" (grey) and install a SPST switch in line.
NOTE: 
By using two of the function switches available on the radio will eliminate the need for two new switches to be installed and mounted.

 


Copyright © 1998,1999,2000, 2001 CBTricks.com

Disclaimer: Although the greatest care has been taken while compiling these documents,

we cannot guarantee that the instructions will work on every radio presented.