Galaxy
DX Radios DX33HML
Documentation Project
CBTricks.com
Frequency Conversion
Export Frequency Conversion
|
1.
|
Remove the top cover from the unit and locate the row of 15 pins across the front of the unit. Unsolder the short jumper wire as shown above to pins E and F of J105 (connected together). |
|
2.
|
Unsolder the shorting
solder bridge of pins E and F of J105 so that they are independent pins
having no connection between them. |
 |
Note: Older units have a loose wire on the top side (speaker side) located behind the band selector switch. This wire (usually purple) connects to the short jumper wire solder diagonally across two pins of the band selector. Newer units already have this connection made. |
WARNING! Not Legal For Class D CB Use In The U.S.A.
Disclaimer: Although the greatest care has been taken while compiling these documents,
we cannot guarantee that the instructions will work on every radio presented.