Galaxy DX Radios DX2547
Documentation Project

CBTricks.com
Clarifier Mod Method 1

Also SEE:
Method #2

Method 1:
1.
First, remove power to the radio. Remove the bottom chassis cover of the radio.
2.
Remove R113 and D68 as shown above.
3.
Connect a jumper wire between +8V and J9 pin F1.
4.
Perform an PLL alignment as shown below.

 

AM Frequency:
Set radio to CH 1 AM RX mode.
Clarifier control to center detent.
Connect frequency counter to TP3.
L20
16.27000 MHz ± 20 Hz
USB Freq:
Set radio to CH 1 USB mode.
Clarifier control to center detent.
Connect frequency counter to TP3.

L21

16.27250 MHz ± 20 Hz

LSB Freq:
Set radio to CH 1 LSB mode.
Clarifier control to center detent.
Connect frequency counter to TP3.
L22
16.26750 MHz ± 20 Hz

Copyright © 1998,1999,2000, 2001, 2002, 2003CBTricks.com

Disclaimer: Although the greatest care has been taken while compiling these documents,

we cannot guarantee that the instructions will work on every radio presented.