Galaxy DX Radios DX2527
Documentation Project

CBTricks.com

Frequency Conversion

Export Frequency Conversion

1.
Remove the top cover from the unit and locate the 4 pin jumper block on the frequency display board behind the front panel. Move the shorting block from it's current position to obtain the desired frequency range shown in the chart above.
2.
Once you have the jumper(s) in place, You must reset the microprocessor by turning the power switch Off. The unit will resume the new frequency range as soon as the power switch is turned on again.

 

WARNING! Not Legal For Class D CB Use In The U.S.A.


Copyright © 1998,1999,2000 CBTricks.com

Disclaimer: Although the greatest care has been taken while compiling these documents,

we cannot guarantee that the instructions will work on every radio presented.

.