Cobra
148GTL DX+
Documentation Project
CBTricks.com
Frequency Conversion
| 1) Remove the cover from the unit and locate 6 pin jumper labeled J29. Move the shorting block from its current position to the back/right position as shown. |
| 2) Re-assemble the unit and check all bands for proper operation. |
VR 1....AM/FM
S-Meter
VR 2....SSB S-Meter
VR 3....SSB Squelch Range
VR 4....AM/FM Squelch Range
VR 5....FM Deviation
VR 6....SSB Carrier Balance
VR 7....TX Offset
VR 8....CW Beep Level
VR 9....RF Meter
VR10...Final Bias
VR11...Final Bias
VR12...Driver Bias
VR13...SSB ALC
VR14...AM/FM High Power
VR16...AM Modulation
VR17...SSB Power
Copyright
© 1998, 1999, 2000, 2001, 2002, 2003, 2004 CBTricks.com
Disclaimer: Although the greatest care has been taken while compiling these documents,
we cannot guarantee that the instructions will work on every radio presented.